Electronic Throttle Control System (EML)

    • Offizieller Beitrag

    INTRODUCTION


    The Electronic Throttle Control System (EML) regulates the operation of the throttle valve(s).
    The scope of EML design on BMW engines provides:


    • Throttle valve positioning for optimum starting


    • Precise idle speed regulation without the use of an external idle control valve/circuit


    • Progressive throttle opening curves matched to the driving program (with EGS/AGS interface)


    • Cruise control operation without additional control modules and linkages


    • Automatic synchronization of the throttles (airflow balancing) for two independent banks, throughout the entire engine speed range (M70, S70, M73 engines only)


    • Intake air volume control for ASC/DSC (Automatic Slip Control/Directional Stability Control) systems


    • Maximum road speed limiting


    • Emergency “Failsafe” operation in the event of component failures


    The EML control module is a link in the total scope of Engine Management Control. The EML
    is interfaced with other control modules to complete the management system, which includes:


    • ECM(s) - Except E46 (EML integrated in MS42.0 ECM)


    • EGS/AGS


    • ABS/ASC


    The main components of the EML system are:


    • Accelerator pedal position sensor (PWG)


    • Accelerator pedal position sensor (driver’s wish sensor - integrated in throttle housing, E46 MS42.0)


    • Throttle valve assembly/assemblies with electronic control motor(s) - DK/MDK


    • EML control module (MS42.0 ECM - E46)


    EML SYSTEM OVERVIEW


    Throttle valve control is managed electronically, using an electric motor(s), without the use of mechanical linkages or cables (except E46 - MDK).

    The EML system uses a microprocessor to convert the input signal for the position of the accelerator pedal into output commands for control of the throttle valve. The position of the pedal is merely a request to the control module for throttle opening. The EML module processes this input request along with other pertinent operating parameters. The throttle valve is then moved to its proper position according to specific control unit programming.


    The total scope of output control functions for the EML includes:


    pasted-from-clipboard.png



    EML Control System Version Identification By Vehicle


    BMW engine management systems have evolved through the model years. The evolution is due to continued technical refinement and emission level compliancy.


    Same version systems may be different from vehicle-to- vehicle. This additionally increases the number of system variations as well.


    pasted-from-clipboard.png


    SYSTEM OVERVIEW - I-P-O


    pasted-from-clipboard.png


    SYSTEM OVERVIEW - I-P-O


    pasted-from-clipboard.png


    SYSTEM OVERVIEW - I-P-O


    pasted-from-clipboard.png

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!