Hello.
Car have been sold. Probably you will see it "somewhere" at this forum.
Best
Hello.
Car have been sold. Probably you will see it "somewhere" at this forum.
Best
Hello.
Car have been sold.
Best
Zitat von Fatandre;146057Why you selling?
The car have been with me for 12 years. I am almost not using it ( a few kilometers per month and starting it from time to time to keep it alive ), and it is time to change...
Some new photos. Radio is a Philips PH7850 ( Business RDS )
Couple additional photos...
Original steering wheel and toolbox...
Updated with some photos, as the original ones were lost after Tinypic closed..
Updated with some photos, as the original ones were lost after Tinypic closed..
A few photos taken this morning...
Zitat von Martin;142978with swiss know how
We hacked the i-bus in 2007 and shared the needed codes to interested developers.
http://www.8er.org/files/modifikatio...elmonitor2.wmv
Second Video: Timeline 2:31 we switch on and off the oil monitor (double click on Check Control Button)
http://www.8er.org/files/modifikatio...elmonitor4.wmv
Cheers
Of course, with Swiss know-how... ( thanks )
I remember that you also shared some info/data with another member from the Spain E31 club called xolmatic.
One video from the oil monitor at my car...
Zitat von Fatandre;142959How did you get the oil temp reading on the OBD?
This was a specific development for E31 that rv8flyboy, from the american bimmerforums, made for me. Also, a new oil filter cap ( metallic ) was bought/installed to allocate the oil temp and oil pressure sensors.
M.O.T. ( also called I.T.V. at Spain ) passed with no errors on 17/04/2019.
Original post at the BMW forum at Spain.
Hello.
I have posted all the details at this post :
http://www.8er.org/forum/showt…-Mauritiusblau-Silvergrey
Best.
PD: Sorry, wrong location when posting first time.
Updated with some photos and english comments.
Gearbox shift selector from a 6 Series ( Ruthenium ) . EDC switch OK.
Engine started... Everything OK.
Hello.
I am selling my E31 ( CB02280 ) after 10 years and a half of being a proud owner.
Gearbox was refurbished at at Spain gearbox specialist ( DOSAUTO ). Converter was sent to Belgium for refurbishment and installed by the same specialist at Spain.
Engine top was fully rebuilt, lifters,rotors, etc,etc... Starter replaced by a refursbished BOSCH. Now using the Wokke v2 chips.
rv8flyboy oil temp and pressure sesnsor installed. Info shown at the MID.
Car is currently using the ALPINA EGS chipset and a rear 3,64 LSD diff.
Springs are CSI ones at the rear and Eibach at front ( there is an interesting post at bimmerforums by auraraptor about his setup ), front EDCs have been refurbished and camber plates , and bump steer plates ( both from Gerry, 8Tech ) were installed. Front sway bar was replaced by a 750 E32 sport one.
I have tons of invoices with all the parts that have been replaced.
The pricing is 15.500€, but it does not include all the replacement parts i have... some DME, EGS, EDC controller, two rear EDC shocks, rear spoiler with third lamp, original springs, rear Eibachs, KMAC original rear sway bar, a 750 E32 automatic gearbox, 3,15 rear diff, front origional sway war.
Pricing including all spare parts is 17.000€.
There is a lot of information at the bmwfaq.org forum, just look for posts done by dudu850 at the E31 section... Just a couple samples...
https://www.bmwfaq.org/threads…-juntas-de-culata.464580/
https://www.bmwfaq.org/threads…-juntas-de-culata.464580/https://www.bmwfaq.org/threads…-caja-de-valvulas.812865/
https://www.bmwfaq.org/threads…cambio-de-volante.397428/
PENDING:
Car should be repainted ( no damages, just old paint but still shiny.. )
Roof cloth need to be fixed.
Seats not ging up/down due to the bowden cables... ( i am tall, this is why i have not fixed this before.. )
Steering box is ok, but i am including at the pricing a replacement part just in case the new owner wanted to change it.
Some photos...
Best
Zitat von Martin;133525From Heinrich posted in the technical section (clubmembers)
8er.ch members not country specific club members, right ?
Zitat von Nico57;133513Hello Eduardo,
Just for information my installation still works without problems after 7 years!
Hi. Thanks for the info. I think will worth the effort to try your route.
Regards-
Hello.
Yes, i know this is an old thread, but i know there is some people interested into this solution, as the plastic piece of the shifter level indicator cracked at some of our E31s... so, any input about present or future developments or sales , will be welcome.
Thanks.
Zitat von dudu;126208Hi.
Looking for one of this kits. Do someone have one lying around ready to be sent ?
Cheers.
Nobody ?
Zitat von chusher;126210I think it's settled. It looks?
Yep, fixed.