This pic is my car. The wheel is from a e36 M3 and is 365mm which makes it amazing
Beiträge von Fatandre
-
-
This is the best wheel
-
Is this in the new garage?
Wont it be hard to manouver the car on it? -
One more thing.
Is it enough just to change the tensioner, or do I also need to change the pulley with it? -
I will have to look into that.
Hope that is the problem. -
IS it possible this could be the reason? When id does not start it only clicks, but does not turn.
Taken from bimmersJust went through this yesterday on Fern's 840. Solenoid click but the starter did not turn. Check for corrosion/high resistance on the thick battery (+) lead cable between the starter motor and the jumper port in the engine bay. With the key held in start position, you should get 12v to the larger stud of the two smaller terminals (Black/Green wire) on the starter motor and should hear the solenoid click indicating ignition switch, relays, and ignition mobilizer are OK. The starter motor draws a lot of current, hence the thick battery cable. Depending on battery voltages and atmospheric conditions, it may sometimes be able to "bite" through corrosion and poor connections, and other times not.
The belt ssound comes only when I start the car
-
I have this one problem.
I start the car and take it for a drive. Car get hot and then sometimes, not always when I turn it off, get some gas, try to start it again nothing happens.
I have to wait for few min and the car starts.
Sometimes I turn the key and hold it for 3 sec, then all of a sudden the starter turns.
Maybe something is not sticking as I had the starter cable replaced with one from 8tech
Other thing is I had the starter reconditioned and when I start the car I get this sound like the belt is slipping.
Could that be the tensioner? -
Amazing, but you said it barely fit and you sure have plenty of space
-
How are things going?
-
I have 2 e31 spec sets.
Time to refurbish them because truly they suit the e31 so well -
This is amazing and you will make it look amazing.
I love red although I would not want one -
Any update on this monster car?
-
-
Need help from a UK fellow member regarding shipping on ebay.
I want to auction a thing on ebay and was wondering if someone could ship it to me since the seller does not ship it internationally. -
Why sell Adrian?
What about all the plans? -
No one interested in a UK CSI steering box?
-
-
I have for sale 2x18" OZ Lips 2.75" wide for OZ MITO, FUTURA, MAE......
The have been used but are in good condition.
I am asking for 220 euro plus shipping. -
Hi guys.
A friend is parting a 1993 RHD 950 CSI.
Maybe there are some things you might be interested in.More pics will be added in the couple of days.
What has been sold(this will be updated regularly):
Engine
transmission
brakes
exhaust
front csi bumper
rear csi diffusor
Shifter knob
EML button
Cluster
engine computers.Pending:
MirrorsIf you are interested in something please pm me and I will gladly see what can be done.
-
Yes, allready replied