Beiträge von wokke

Zitat von Vic1;118210

how do I order them from you Cheers Vic

please PM me for details and a quote incl. shipping cost.

Zitat von wayneblackwell1000;118711

At that price its a bargain and someone will get a lovely example, hope all goes well Brendan, what have you got in mind for a replacement?

the logical upgrade would be an Aston Martin

Egil, the following pictures of my M635CSi are meant to cheer you up a little again

and a lot more right here:
http://www.wokke.de/BMW-E24-M6…r-des-Grauens/page_01.htm

Just don't be shy when using the angle grinder:

After all the outcome is quite acceptable and none of that rust came back so far. But some other small spots popped up

If the job is done right it'll take quite some years.
On my M635CSi I had severe corrosion issues and as a matter of fact the repaired parts are still fine after about 10 years.
But the brown devil pops up elsewhere all of a sudden. As long as you fight it early enough and then do it properly it's ok.
Part of the maintenance procedure of an old car.

I have no doubts that you'll take any necessary action.
The "problem" IMO is to decide what to use. So many different opinions about what the best stuff is.
An it will come back. Just a matter of time. Ask me how I know.

As long as the car doesn't remain on the ground while you're lifting the hoist there is still hope

Most important is that you have the inside treated properly otherwise you'll see this again in no time.

Zitat von Argonaut;118598

Thanks Wolf, I sent you an email

and I already replied

Zitat von MB;118596

Mine don't have those, I feel somewhat underloved.

I was out of them for a while but I happily send you a set.
PM me with your address and they go out immediately.

Love
Wolf

email me at info@wokke.de and I supply all the info you need.

Unfortunately my initial calculation was a bit optimistic. The set is €65.- shipped to any location.
The above post of mine is corrected accordingly.

Cheers
Wolf

Thanks a lot Vic. Bolt set is already in the mail.

Zitat von Vic1;118216

What does it mean bolts are 10.9 instead of 8.8

It is the strength of the material.
Higher number means stronger steel.

I just saw that I posted in the wrong sub-forum.
Sorry about that. But I can't delete it anymore.

Since those eccentric bolts are NLA from BMW I decided to run a small production badge.
I have currently 25 sets available. They replace the following OEM part numbers:

For lower wishbone
33 32 1 133 881 Eccentric bolt33 32 1 133 882 Eccentric flat washer07 12 9 922 745 Self-locking hex nut

For upper wishbone
33 32 1 133 883 Eccentric bolt33 32 1 133 884 Eccentric flat washer07 12 9 900 047 Self-locking hex nut

Bolts are 10.9 instead of 8.8 (OEM quality)

Price is €65,- shipped to any location worldwide.

Since those eccentric bolts are NLA from BMW I decided to run a small production badge.
I have currently 25 sets available. They replace the following OEM part numbers:

For lower wishbone
33 32 1 133 881 Eccentric bolt33 32 1 133 882 Eccentric flat washer07 12 9 922 745 Self-locking hex nut

For upper wishbone
33 32 1 133 883 Eccentric bolt33 32 1 133 884 Eccentric flat washer07 12 9 900 047 Self-locking hex nut

Bolts are 10.9 instead of 8.8 (OEM quality)

Price is €59,- per set plus shipping

Since those eccentric bolts are NLA from BMW I decided to run a small production badge.
I have currently 25 sets available. They replace the following OEM part numbers:

For lower wishbone
33 32 1 133 881 Eccentric bolt33 32 1 133 882 Eccentric flat washer07 12 9 922 745 Self-locking hex nut

For upper wishbone
33 32 1 133 883 Eccentric bolt33 32 1 133 884 Eccentric flat washer07 12 9 900 047 Self-locking hex nut

Bolts are 10.9 instead of 8.8 (OEM quality)

Price is €59,- per set plus shipping

Since those eccentric bolts are NLA from BMW I decided to run a small production badge.
I have currently 25 sets available. They replace the following OEM part numbers:

For lower wishbone
33 32 1 133 881 Eccentric bolt33 32 1 133 882 Eccentric flat washer07 12 9 922 745 Self-locking hex nut

For upper wishbone
33 32 1 133 883 Eccentric bolt33 32 1 133 884 Eccentric flat washer07 12 9 900 047 Self-locking hex nut

Bolts are 10.9 instead of 8.8 (OEM quality)

Price is €59,- per set plus shipping

Since those eccentric bolts are NLA from BMW I decided to run a small production badge.
I have currently 25 sets available. They replace the following OEM part numbers:

For lower wishbone
33 32 1 133 881 Eccentric bolt33 32 1 133 882 Eccentric flat washer07 12 9 922 745 Self-locking hex nut

For upper wishbone
33 32 1 133 883 Eccentric bolt33 32 1 133 884 Eccentric flat washer07 12 9 900 047 Self-locking hex nut

Bolts are 10.9 instead of 8.8 (OEM quality)

Price is €59,- per set plus shipping

I indeed have 25 sets available right now.
Waterjet cut washers, 10.9 (and not 8.8 as OEM) bolts.
All cadmium (goldish) plated incl. nuts.
Price per set is €65,- shipped to any location worldwide.

Zitat von Superstarr840;117743

Hi all, Sorry to say the wishbones have sold and heading for Germany. Thank you for looking.

Am I going to see them soon for refurbishment?