Fitting HID lights

Fitted my kit last week not that difficult, however the only way you wll get the much longer hid globes into the low beam bulb socket is to cut a hole one and a half inch or +/_ 25mm hole in line with the globe socket though the side of plastic housing that contains the headlights . Then take of the rubber gromet and feed the assembly though the hole and offer the new globe into the low beam socket. After wiring up using the plug and play method reseal the hole you have cut though the housing with a plastic plate and superglue the patch plate to the side of the headlight housing. and remember to rewaterproof the headlight housing.