Hello, someone who has a good explanation of how to drain
hydralic in a 850, I need to change because it has been mixed with chf and atf.
Hydralic
-
-
I would (if you have it) remove the bottom filter No 10 (brass casing).
Let it drain all from the main reservoir refill and run-up the engine, turning the steering on full lock side to side. Stop engine and repeat the process until the fluid remains green and then replace all the filters in the system.
As you can see by the link below there are a few different set-ups so take your bits out and see which you have.... Hope this helps but do it asap as the different oils react and perish the seals....
http://www.realoem.com/bmw/par…&mospid=47330&hg=32&fg=20 -
Thanks for the answer
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!