I am battling with 2 of the 8's with hot air building up behind the consul
so much so thet if I use a tape in the deck it comes out boiling hot
Im told everything in the Matrix is working correctly but
still the hot air
Has anyone had this problem and managed to sort it out
cheers
Hot Air Behind Consul
-
-
Seems like you heater matrix is fully on. Check the heating control valves on the engine-side of the bulk-head, on the left side of the car. The default position is Fully Open, so either they are stuck or are no receiving the proper signals from the IHKA control unit.
-
Zitat von bm840ci;88943
I am battling with 2 of the 8's with hot air building up behind the consul
so much so thet if I use a tape in the deck it comes out boiling hotIm told everything in the Matrix is working correctly but
still the hot air
Has anyone had this problem and managed to sort it out
cheersYou say behind the centre consul?
So are you getting hot and cold through the vents or just hot, as my old one used to get very warm behind there, but still blew cold air if required. -
ths guys
I will try it out and see how we go
Jeff
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!