I know that csi springs are about 10mm lower(shorter) than ci springs but are csi springs stiffer/harder than ci
I want little bit stiffer/harder suspension but not too "low"
Help please
I know that csi springs are about 10mm lower(shorter) than ci springs but are csi springs stiffer/harder than ci
I want little bit stiffer/harder suspension but not too "low"
Help please
I believe that you are correct.
Less drop and a higher spring rate for the CSI.
Also the anti-sway bars were increased in size for the CSI.
OK, thanks TerryY
Terry, last time forget to ask that can I replace my CI springs to CSI springs without any major modifications...do they fit?
Terry or anyone else know that....thanks
All of the 8 series have interchangeable springs.
So the answer is a definite Yes to CSi springs.
You could go one better...
I have the Hamann springs on my CSi. Even lower than the stock CSi springs.
Upside - excellent cornering and lane changing. Looks really cool
Downside - too low for speed bumps. 'Very' firm ride
You can also use the M-Tech Springs.
They are 20mm Lower than the Stock or EDC springs.
Best solution would be: M-Springs+M-Shocks+25mm M-Sway Bar.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!