As above, I'm trying to remove my steering wheel & try as i might i cannot or don't have the correct tool to take out the 2 bolts holding the airbag to the wheel prior to removal of the wheel.
I have tried everything in my box like---Posi/torx/alan key to no avail 
Anybody help 
It's a torx T30.
Thomas
Thomas thanks for that i have tried the t25 which was obviously not the correct size ,i shall try again tomorrow with a t30 
I had tried or so i thought t30 & that was too big hence the confusion 
Nope t30 is defo too big, couldn't wait 
I think they may well have been removed before & the corners are rounded 
.
Still i will try again before i abandon hope of fitting my ALPINA wheel 
OK I think I'm going to have to use a bolt extaction tool
Anyone out there with tips Is it do-able
DO NOT try an extractor on it!
It is a T30 TAMPERPROOF bit so if you are not familiar with them, it has a small pin in the middle of the socket to stop you using a normal T30 bit.
See here part no 2903.
http://www.phoenixmotorsport.c…older/sockets_catalog.php
8Tech
Much appreiciated 8 tech, that explains my problem 
Well got me some "star drive anti tamper" do da's, I managed to get 1 screw out but the other bugger is in for good it seems, right now i've abandoned proceedings.
The Drive size is Definatley t25, maybe it is different on the early/later models.
Anyway many thanks Gerry for the pointer
I have checked these bolts on my car today ( 93 850ci US model ) and it is a normal T30 and it's not a temper proof bolt. I don't know where 8tech gets the idea from that the bolt is tamper proof at least not here in the US .
Maybe it's a US model verses a Euro model difference here. 
Thomas
Mine is a normal T30 also.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
