I would like to install a bluetooth handsfree phone solution, and would like to use a Bury 9060 ( http://www.bury.com/en/hands-f…tems/cc-9060/cc-9060.html ).
I have installed one in my wife's Audi, and it's great. The installation was pretty straight forward, as it plugged into the existing ISO conectors being used for the stock hifi.
Obviously my 840 doesn't have the benefit of ISO connectors, but I am happy to do a little cable splicing and connecting.
The Bury has an electronic box that interrupts the headunit's speaker signal and feeds in its output. I have read that the output of my BMW headunit puts out a signal that is a lower than speaker- , and higher than line output. And from another member here I read that for his Bury installation, a seperate speaker was fitted. However I would only want to use my car speakers, so can I fit a resistor to the Bury's output to make this work? If so, does anyone know what value?
And, is there somewhere where I can find what all of the pins/colours on my headunit are?
Thanks!